CRISPR-dCas9 based DNA detection scheme for diagnostics in resource-limited settings.

Nucleic-acid detection is crucial for basic research as well as for applications in medicine such as diagnostics. In resource-limited settings, however, most DNA-detection diagnostic schemes are inapplicable since they rely on expensive machinery, electricity, and trained personnel. Here, we present an isothermal DNA detection scheme for the diagnosis of pathogenic DNA in resource-limited settings. DNA was extracted from urine and blood samples using two different instrument-free methods, and amplified using Recombinase Polymerase Amplification with a sensitivity of <10 copies of DNA within 15 minutes. Target DNA was bound by dCas9/sgRNA that was labelled with a DNA oligomer to subsequently induce Rolling Circle Amplification. This second amplification step produced many copies of a G-quadruplex DNA structure that facilitates a colorimetric readout that is visible to the naked eye. This isothermal DNA-detection scheme can be performed at temperatures between 20-45 °C. As an example of the applicability of the approach, we isothermally (23 °C) detected DNA from a parasite causing visceral leishmaniasis that was spiked into buffer and resulted in a sensitivity of at least 1 zeptomole. For proof of principle, DNA spiked into blood was coupled to the CRISPR-dCas9-based detection scheme yielding a colorimetric readout visible to the naked eye. Given the versatility of the guide-RNA programmability of targets, we envision that this DNA detection scheme can be adapted to detect any DNA with minimal means, which facilitates applications such as point-of-care diagnostics in resource-limited settings.

DNA flowerstructure co-localizes with human pathogens in infected macrophages.

Herein, we characterize the cellular uptake of a DNA structure generated by rolling circle DNA amplification. The structure, termed nanoflower, was fluorescently labeled by incorporation of ATTO488-dUTP allowing the intracellular localization to be followed. The nanoflower had a hydrodynamic diameter of approximately 300 nanometer and was non-toxic for all mammalian cell lines tested. It was internalized specifically by mammalian macrophages by phagocytosis within a few hours resulting in specific compartmentalization in phagolysosomes. Maximum uptake was observed after eight hours and the nanoflower remained stable in the phagolysosomes with a half-life of 12 h. Interestingly, the nanoflower co-localized with both Mycobacterium tuberculosis and Leishmania infantum within infected macrophages although these pathogens escape lysosomal degradation by affecting the phagocytotic pathway in very different manners. These results suggest an intriguing and overlooked potential application of DNA structures in targeted treatment of infectious diseases such as tuberculosis and leishmaniasis that are caused by pathogens that escape the human immune system by modifying macrophage biology.

A new DNA sensor system for specific and quantitative detection of mycobacteria.

In the current study, we describe a novel DNA sensor system for specific and quantitative detection of mycobacteria, which is the causative agent of tuberculosis. Detection is achieved by using the enzymatic activity of the mycobacterial encoded enzyme topoisomerase IA (TOP1A) as a biomarker. The presented work is the first to describe how the catalytic activities of a member of the type IA family of topoisomerases can be exploited for specific detection of bacteria. The principle for detection relies on a solid support anchored DNA substrate with dual functions namely: (1) the ability to isolate mycobacterial TOP1A from crude samples and (2) the ability to be converted into a closed DNA circle upon reaction with the isolated enzyme. The DNA circle can act as a template for rolling circle amplification generating a tandem repeat product that can be visualized at the single molecule level by fluorescent labelling. This reaction scheme ensures specific, sensitive, and quantitative detection of the mycobacteria TOP1A biomarker as demonstrated by the use of purified mycobacterial TOP1A and extracts from an array of non-mycobacteria and mycobacteria species. When combined with mycobacteriophage induced lysis as a novel way of effective yet gentle extraction of the cellular content from the model Mycobacterium smegmatis, the DNA sensor system allowed detection of mycobacteria in small volumes of cell suspensions. Moreover, it was possible to detect M. smegmatis added to human saliva. Depending on the composition of the sample, we were able to detect 0.6 or 0.9 million colony forming units (CFU) per mL of mycobacteria, which is within the range of clinically relevant infection numbers. We, therefore, believe that the presented assay, which relies on techniques that can be adapted to limited resource settings, may be the first step towards the development of a new point-of-care diagnostic test for tuberculosis.

Novel DNA sensor system for highly sensitive and quantitative retrovirus detection using virus encoded integrase as a biomarker.

In the current study we describe a novel DNA sensor system that allows the detection of single catalytic DNA integration events mediated by retrovirus encoded integrase (IN) present in viral particles. This is achieved by rolling circle amplification mediated conversion of enzymatic reactions happening within nanometer dimensions to directly detectable micrometer sized DNA products. The system utilizes the unique integration reaction of IN to generate a surface anchored nicked DNA circle that serves as a substrate for rolling circle amplification and allows for specific, quantitative and sensitive detection of purified recombinant IN or virus particles with a detection limit of less than 30 virus particles per µL of sample. Moreover, by modifying the nucleotide sequences of the utilized DNA it was possible to tailor the system to distinguish between the highly pathogenic lentivirus HIV and the gammaretrovirus murine leukemia virus present in a given sample. Infections with HIV remain a major threat to global health with more than 2 million new infections and 1 million deaths each year. The sensitive and specific detection of HIV particles based on IN activity holds promise for the development of a new type of diagnostic tools suitable for early (within hours of infection) detection of HIV, which would be valuable for prevention strategies as well as for efficient treatment.

DNA hairpins promote temperature controlled cargo encapsulation in a truncated octahedral nanocage structure family.

In the present study we investigate the mechanism behind temperature controlled cargo uptake using a truncated octahedral DNA cage scaffold functionalized with one, two, three or four hairpin forming DNA strands inserted in one corner of the structure. This investigation was inspired by our previous demonstration of temperature controlled reversible encapsulation of the cargo enzyme, horseradish peroxidase, in the cage with four hairpin forming strands. However, in this previous study the mechanism of cargo uptake was not directly addressed (Juul, et al., Temperature-Controlled Encapsulation and Release of an Active Enzyme in the Cavity of a Self-Assembled DNA Nanocage, ACS Nano, 2013, 7, 9724-9734). In the present study we use a combination of molecular dynamics simulations and in vitro analyses to unravel the mechanism of cargo uptake in hairpin containing DNA cages. We find that two hairpin forming strands are necessary and sufficient to facilitate efficient cargo uptake, which argues against a full opening-closing of one corner of the structure being responsible for encapsulation. Molecular dynamics simulations were carried out to evaluate the atomistic motions responsible for encapsulation and showed that the two hairpin forming strands facilitated extension of at least one of the face surfaces of the cage scaffold, allowing entrance of the cargo protein into the cavity of the structure. Hence, the presented data demonstrate that cargo uptake does not involve a full opening of the structure. Rather, the uptake mechanism represents a feature of increased flexibility integrated in this nanocage structure upon the addition of at least two hairpin-forming strands.

Receptor-Mediated Entry of Pristine Octahedral DNA Nanocages in Mammalian Cells.

DNA offers excellent programming properties for the generation of nanometer-scaled polyhedral structures with a broad variety of potential applications. Translation to biomedical applications requires improving stability in biological fluids, efficient and selective cell binding, and/or internalization of the assembled DNA nanostructures. Here, we report an investigation on the selective mechanism of cellular uptake of pristine DNA nanocages in cells expressing the receptor "oxidized low-density lipoprotein receptor-1" (LOX-1), a scavenger receptor associated with cardiovascular diseases and, more recently, identified as a tumor marker. For this purpose a truncated octahedral DNA nanocage functionalized with a single biotin molecule, which allows DNA cage detection through the biotin-streptavidin assays, was constructed. The results indicate that DNA nanocages are stable in biological fluids, including human serum, and are selectively bound and very efficiently internalized in vesicles only in LOX-1-expressing cells. The amount of internalized cages is 30 times higher in LOX-1-expressing cells than in normal fibroblasts, indicating that the receptor-mediated uptake of pristine DNA nanocages can be pursued for a selective cellular internalization. These results open the route for a therapeutic use of pristine DNA cages targeting LOX-1-overexpressing tumor cells.

Real-time investigation of human topoisomerase I reaction kinetics using an optical sensor: a fast method for drug screening and determination of active enzyme concentrations.

Human DNA topoisomerase I (hTopI) is a nuclear enzyme that catalyzes relaxation of super helical tension that arises in the genome during essential DNA metabolic processes. This is accomplished through a common reaction mechanism shared among the type IB topoisomerase enzymes, including eukaryotic and poxvirus topoisomerase I. The mechanism of hTopI is specifically targeted in cancer treatment using camptothecin derivatives. These drugs convert the hTopI activity into a cellular poison, and hence the cytotoxic effects of camptothecin derivatives correlate with the hTopI activity. Therefore, fast and reliable techniques for high throughput measurements of hTopI activity are of high clinical interest. Here we demonstrate potential applications of a fluorophore-quencher based DNA sensor designed for measurement of hTopI cleavage-ligation activities, which are the catalytic steps affected by camptothecin. The kinetic analysis of the hTopI reaction with the DNA sensor exhibits a characteristic burst profile. This is the result of a two-step ping-pong reaction mechanism, where a fast first reaction, the one creating the signal, is followed by a slower second reaction necessary for completion of the catalytic cycle. Hence, the burst profile holds information about two reactions in the enzymatic mechanism. Moreover, it allows the amount of active enzyme in the reaction to be determined. The presented results pave the way for future high throughput drug screening and the potential of measuring active hTopI concentrations in clinical samples for individualized treatment.

Temperature-controlled encapsulation and release of an active enzyme in the cavity of a self-assembled DNA nanocage.

We demonstrate temperature-controlled encapsulation and release of the enzyme horseradish peroxidase using a preassembled and covalently closed three-dimensional DNA cage structure as a controllable encapsulation device. The utilized cage structure was covalently closed and composed of 12 double-stranded B-DNA helices that constituted the edges of the structure. The double stranded helices were interrupted by short single-stranded thymidine linkers constituting the cage corners except for one, which was composed by four 32 nucleotide long stretches of DNA with a sequence that allowed them to fold into hairpin structures. As demonstrated by gel-electrophoretic and fluorophore-quenching experiments this design imposed a temperature-controlled conformational transition capability to the structure, which allowed entrance or release of an enzyme cargo at 37 °C while ensuring retainment of the cargo in the central cavity of the cage at 4 °C. The entrapped enzyme was catalytically active inside the DNA cage and was able to convert substrate molecules penetrating the apertures in the DNA lattice that surrounded the central cavity of the cage.

DNA-based sensor for real-time measurement of the enzymatic activity of human topoisomerase I.

Sensors capable of quantitative real-time measurements may present the easiest and most accurate way to study enzyme activities. Here we present a novel DNA-based sensor for specific and quantitative real-time measurement of the enzymatic activity of the essential human enzyme, topoisomerase I. The basic design of the sensor relies on two DNA strands that hybridize to form a hairpin structure with a fluorophore-quencher pair. The quencher moiety is released from the sensor upon reaction with human topoisomerase I thus enabling real-time optical measurement of enzymatic activity. The sensor is specific for topoisomerase I even in raw cell extracts and presents a simple mean of following enzyme kinetics using standard laboratory equipment such as a qPCR machine or fluorimeter. Human topoisomerase I is a well-known target for the clinically used anti-cancer drugs of the camptothecin family. The cytotoxic effect of camptothecins correlates directly with the intracellular topoisomerase I activity. We therefore envision that the presented sensor may find use for the prediction of cellular drug response. Moreover, inhibition of topoisomerase I by camptothecin is readily detectable using the presented DNA sensor, suggesting a potential application of the sensor for first line screening for potential topoisomerase I targeting anti-cancer drugs.